,

Custom Stainless Steel Plates

SKU: Custom stainless Steel Plates & Markers Categories: ,
Add to quote

Installation Procedures

Simply drill a 5mm hole into the base material to a depth deeper than the embedment required.

Using a hammer or mallet drive the anchor through the fixture into the another hole the until the head is fimly seated against the fixture.

Be sure the anchor is drive to the required embedment depth.

Mushroom head and stainless steel spike

The Mushroom head and stainless steel spike’s are designed to be a simple and robust means of fixing tags in place. The spike is formed with an ‘s’ shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring-type compression force against the walls of the hole.

Use of the spike anchor reduces installation time, since the anchor is pre-expanded, and there is no secondary lighting operation required. This greatly reduces the overall cost of an anchor installation. The simple, installation procedure helps to insure a quality application each time the spike anchor is used

Fixed Legs & Single Spike Tags

All fixed leg tags and single spike markers are designed to simply be pushed into wet concrete.

Custom Stainless Metal name Plates Label Markers & Tags – Custom Design – ‘DESIGN YOUR OWN’

Various sizes of quality stainless steel to choose from and industrial engraved with quick turnaround time.

Used by many Councils, Electrical, Communication, Water, Gas, Civil & Utility companies all around Australia. Custom designed for easy and quick identification & location of services & utilities.

Stainless Custom Label tags – most popular sizes and in stock:

1.200 x 200mm by 2mm thick S/S

  1. 150 x 100mm by 2mm thick S/S
  2. 150 x 75mm by 2mm thick S/S
  3. 150 x 65mm by 2mm thick S/S
  4. 100 x 50mm by 2mm thick S/S
  5. 75 x 75mm by 2mm thick S/S
  6. 60mm dia / 75mm dia / 100mm dia / 200mm dia by 2mm thick round S/S
  7. Custom Kerbmarkers – 38mm dia x 1.6mm thick S/S pressed out tag.

 

Option of including Stainless steel mushroom head fixing spikes, (for Wet or Dry Concrete) with plates.

Related products