Installation Procedures

Simply drill a 5mm hole into the base material to a depth deeper than the embedment required.

Using a hammer or mallet drive the anchor through the fixture into the another hole the until the head is fimly seated against the fixture.

Be sure the anchor is drive to the required embedment depth.

Mushroom head and stainless steel spike

The Mushroom head and stainless steel spike’s are designed to be a simple and robust means of fixing tags in place. The spike is formed with an ‘s’ shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring-type compression force against the walls of the hole.

Use of the spike anchor reduces installation time, since the anchor is pre-expanded, and there is no secondary lighting operation required. This greatly reduces the overall cost of an anchor installation. The simple, installation procedure helps to insure a quality application each time the spike anchor is used

Fixed Legs & Single Spike Tags

All fixed leg tags and single spike markers are designed to simply be pushed into wet concrete.

Rail Survey Mark – used by Sydney Trains. Stainless steel tag for Commercial & domestic use. Sydney Trains, Approved and with or without numbers. (with 5 registered numbers – please purchase through Sydney Trains NSW).

Stainless steel Kerbmarkers are 38mm dia x 1.6mm thick. Includes a 5 x 50mm Stainless steel mushroom head fixing spike, (for Wet or Dry concrete).

Also available – Brass Gun metal 100mm Diameter PSM with a 75mm leg, 100mm dia Stainless steel by 2mm thick plate and 38mm dia S/S survey mini marker – QLD approved design. Price upon request.